Oroginal Auto Equipment Launch KWA-300 Wheel Aligner

3D/2D View Program, Durable target, 4 meter wheel base, Precise measurement, User friendly, KWA-300 3D Wheel Aligner is the latest 3D graphic wheel aligner which can establish movement models and therefore provides full-range aligning service through visual measurement technology.
KWA-300 3D Wheel Aligner features complete functionalities, reasonable interface, automatic monitoring and operating tips to eliminate improper operation. The equipment is capable of convenient alignments with real time adjustment of front and rear wheels, and a full range of chassis diagnostic parameters.

Durable Target
1. Passive target demanding no calibration
2. Easy operation and maintenance due to no request for cable connection and battery charging
3. Convenient runout compensation procedure

Recise measurement
Stable light source
Dynamic compensation measurement
Real-time display of data makes the adjustment easier
Flexible measuring modes give easy access to users of traditional wheel aligners
User friendly
Advanced graph processing, mode identification and computer visual technology
Perfect 3D model on the base of Kinesiology, optical measurement and automotive technology
KWA-300 3D Wheel Aligner is the latest 3D graphic wheel aligner which can establish movement models and therefore
provides full-range aligning service through visual measurement technology.
KWA-300 3D Wheel Aligner features complete functionalities, reasonable interface, automatic monitoring and
operating tips to eliminate improper operation. The equipment is capable of convenient alignments with real time
adjustment of front and rear wheels, and a full range of chassis diagnostic parameters.
Feature
Durable target
Passive target demanding no periodic calibration
Easy operation and maintenance due to no request for cable connection and battery charging
Convenient runout compensation procedure with no need for reference

Specifications of KWA-300:

Item Measurement Range
Total toe-in 0~40
Camber 0~20
Caster 0~25
Kingpin Inclination 0~25
Maximal wheelbase it can Measure 4000mm
Requrements on Surroundings: Ambient temperature: 0~50 Relative humidity: ≤85%
More details about car diagnostic tool, you can visit the blog http://www.obdscanner.us/.

Super Value product–Elnec Beeprog Programmer

The Elnec Beeprog Programmer at vtoolshop can be connected with pc.

Get professional Elnec Beeprog Programmer at vtoolshop at super low Value.
HARDWARE

    FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you’ll be ready to program the full range of today’s advanced low-voltage devices.
    The programmer performs device insertion test (wrong or backward position) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.
    The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.
    Built-in protection circuits eliminate damage of programmer and/or programmed device due to environment or operator failure. All the inputs of the BeeProg programmer, including the ZIF socket, connection to PC and power supply input, are protected against ESD up to 15kV.
    BeeProg programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.
    Various socket converters are available to handle device in PLCC, SOIC, PSOP, SSOP, TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other packages.

SOFTWARE

    Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.
    Standard device-related commands (read, blank check, program, verify, erase) are boosted by some test functions (insertion test, signature-byte check), and some special functions (autoincrement, production mode – start immediately after insertion of chip into socket).
    All known data formats are supported. Automatic file format detection and conversion during loading of file.
    The rich-featured auto-increment function enables one to assign individual serial numbers to each programmed device – or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file.
    The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.
    The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.
    The remote control feature allows to be PG4UW software flow controlled by other application � either using .BAT file commands or using DLL file.
    DLL file, examples (C/PAS) and manual are part of standard software delivery.
    Jam files of JEDEC standard JESD-71 are interpreted by Jam Player. Jam files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmer in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface).
    VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF file and contains high-level IEEE 1149.1 bus operations. VME files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmer in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface).
    Multiple devices are possible to program and test via JTAG chain: JTAG chain (ISP-Jam) or JTAG chain (ISP-VME).
    Attaching of more BeeProg programmers to the same PC (through USB port) , whichsupport as many chips, as are supported by BeeProg programmer and without obvious decreasing of programming speed. It is important to know, there is a concurrent multiprogramming – each programmer works independently and each programmer can program different chip, if necessary.

Elnec Beeprog Device support:

EPROM: NMOS/CMOS, 2708, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 1Gbit, with 8/16 bit data width, full support for LV series
Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
1-Wire E(E)PROM: DS1xxx, DS2xxx
PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE, MAX II
PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx
PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis, Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI
Microcontrollers 48 series: 87×41, 87×42, 87×48, 87×49, 87×50 series
Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips LPC series
Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/…
Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny, ATmega series
Microcontrollers Cypress: CY7Cxxxxx, CY8Cxxxxx
Microcontrollers ELAN: EM78Pxxx
Microcontrollers MDT 1xxx and 2xxx series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx, dsPIC series
Microcontrollers Motorola (Freescale): 68HC05, 68HC08, 68HC11, HCS08, HCS12 series
Microcontrollers Myson MTV2xx, 3xx, 4xx and 5xx series
Microcontrollers National: COP8xxx series
Microcontrollers NEC: uPD78Fxxx series
Microcontrollers Novatek: NT68xxx series
Microcontrollers Scenix (Ubicom): SXxxx series
Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx, STR7xx series
Microcontrollers TI: MSP430 and MSC121x series
Microcontrollers ZILOG: Z86/Z89xxx and Z8xxx series
Microcontrollers other: EM Microelectronic, Fujitsu, Goal Semiconductor, Hitachi, Holtek, Princeton, Macronix, Winbond, Infineon(Siemens), Samsung, Toshiba, …
Programmer, through ISP connector
Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, serial data Flash, PLD configuration memories
Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
Microcontrollers Cypress: CY8C2xxxx
Microcontrollers Elan: EM78Pxxx, EM6xxx series
Microcontrollers EM Microelectronic: 4 and 8 bit series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, PIC24xxx, dsPIC series
Microcontrollers Motorola/Freescale: HC11 series, HC908 series (both 5-wire, All-wire), HCS08, HCS12
Microcontrollers NEC: uPD7xxx series
Microcontrollers Philips: LPC2xxx series, LPC series, 89xxx series
Microcontrollers Scenix (Ubicom): SXxxx series
Microcontrollers TI: MSP430 (both JTAG and BSL series), MSC12xxx series
PLD: Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC
Various PLD (also by JAM player/JTAG support):
Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II
Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
Elnec Beeprog Package Includes:

- BeeProg programmer
- switching power adapter 100..240V AC/15V DC/1A
- connection cable PC-programmer, LPT port
- connection cable PC-programmer, USB port
- ISP cable
- diagnostic POD for selftest of the programmer
- anti-dust cover for ZIF socket
- user manual
- software
- registration card
- calibration test report
- transport case
Additional services
- Keep Current – ELNEC sends to user the latest version of programmer software and updated user documentation (Keep-Current package)
- AlgOR (Algorithms On Request) – add new supported devices on customer request
More knowledge about car diagnostic tool, you can go to the blog http://www.autobossv30.org/.

Proposed solutions for Intermittent issues Under The Hood

Recently,Brad Bergholdt,an automotive technology instructor at Evergreen Valley College in San Jose, Calif made some suggestions for intermittent issues Under The Hood.His suggestions proved practical.

Sometimes car goes out with no problem but if Car owner stop somewhere for 15-20 minutes, it won't start;Sometimes car won't idle smoothly in park or in dre with foot on the brake.Then you need car diagnostic tool All these intermittent problems are certainly frustrating but solvable.

In both cases it's likely the on-board diagnostics system, or OBD-II, has set a trouble code, which could be hugely helpful in determining the cause.Additionally, a scan-tool snapshot of engine parameters can be taken during the no-start or a runs-rough episode, providing sensor inputs, output commands, fuel and idle system correction percentages, and a host of other pertinent information.The list can be compared to a previous snapshot taken when the vehicle was running fine.Scan data is great, but one needs to remember the listed values are what the engine computer believes is happening, which isn't always the same as the actual conditions occurring beneath the hood.

He points out sometimes even with great car diagnostic tool information, you still need to resort to old-school tests and observations.

Note: When you face the intermittent issues under the hood ,you can also consult our vtoolshop.There are more about autocom cdp.

Readout of Fault Code in Automotive

Self-diagnosis System
The fault in vehicle electronic system is stored in KAM of ECU as fault code. The fault code can be read out by the on board diagnostic system or external gm tech2 scan tool.

The on board diagnostic system in different vehicle may indicate the fault in different way. In general, the following ways are popular:
- Blinking of fault indicators on the instrument panel
- Swing of multimeter index
- Blinking of red/green LED on ECU
- Shown by a special device

The more intuitionist way for showing the fault is by external scan tool.

The diagnostic system of modern cars is equipped with diagnostic socket or DLC (data link connector). Fault code in vehicle ECU can be read out by connecting a scan tool to the diagnostic socket. In early time, each vehicle system had its own type of diagnostic socket. Since 1996, SAE has specified a uniform system called OBDII on board diagnostic system. Each vehicle that is made in accordance with the system may have the same diagnostic socket, same definition of pin and same description of fault code. The control units of every system are connected to bus, so only one diagnostic socket is needed for readout of fault code. obd provides the possibility of reading data stream and displaying working status of switches and actuators. Moreover, external scan tool can send commands to activate the actuators.

X431 Master is such an external scan tool for vehicle diagnosis. It not only has the diagnostic function like reading fault code, reading data stream, actuation test, displaying sensor waveform, coding control unit, etc., but also has PDA function.